APC NetShelter Rack PDU Advanced provide reliable power distribution to IT Equipment within server and/or networking racks. PDU level power metering via remote access and local display for power visibility and notification of potential overload. 4-in-1 combination outlets which can be used as either C13, C19, C15, or C21 outlets provide unparreled deployment flexibility. Maximum outlet density with 42 outlets in a 2.2" wide form factor. Outlets on the PDUs are color coded and/or labeled by breaker and input phase on 3 phase models to simplify deployment. Provides an alternating phase design whereby each of the 3 phases are organized into small outlet groups which alternate from top to bottom of the PDU to facilitate better power cord management and promote better load balancing. Power Sharing allows PDUs cascaded together via 2 ethernet ports enable an Network Management Card to continue functioning in the event of an AC power loss. No interruption in Network communication, sensors operation, and alarm traps. Live Swap Network Management Card (NMC) which can be replaced without powering down the PDU or connected devices to minimize downtime in the unlikely event of an NMC power event. Rated and approved to operate up to 60C (140F) at full load ensures reliability and availability even in today's high density deployments. Gigabit ethernet to enhance and standardize network connectivity across all assets in the data center. A second ethernet port (10/100) is available to allow cascading to other PDUs, connect to a 2nd private network, or provide network redundancy. 1% metering accuracy for the peace of mind to use NetShelter Rack PDU Advanced to bill based on power usage. In addition, the higher level of accuracy ensures the most precise measures for capacity planning and threshold alarm monitoring. Two environmental sensor ports allow for optional sensors (sold separately) to be connected. For data center deployments across multiple regions, these PDUs are both UL and CE rated providing one PDU that can be used globally to simplify and standardize deployment.

Key Features:

• 42 outlets with 4-in-1 compatibility (C13, C19, C15, C21).
• 1% metering accuracy for precise power management and billing.
• Supports cascading with dual Ethernet ports for network redundancy.
• Rated for operation up to 60°C (140°F) for high-density environments.

Specifications:

Attribute	Details
Part Number	APDU10450ME
Brand	APC
Product Type	Rack PDU
Product Series	NetShelter
Cord Length	5.9 ft (1.8 m)
Input Voltage	415 V 3-Phase
Output Voltage	240 V
Input Current Limits	60 A
Load Capacity	34.6 kW
Height	71.89 in (182.6 cm)
Width	2.20 in (5.6 cm)
Depth	2.95 in (7.5 cm)
Product Weight	25.8 lb (11.7 kg)
Mounting Location	Side
Rack Units	0U
Communication Port Protocol	1000BASE-T, 10/100BASE-T
Ambient Air Temperature (Op)	23…140 °F (-5…60 °C)
Relative Humidity (Op)	5…95 %
Operating Altitude	0...10000 ft
Certification	UL 62368-1, CSA C22.2 No 62368-1
IP Degree of Protection	IP44